Original Prusa i3 MK3/MK2.5 MMUv2 SSS Backfeed Containment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
THIS IS PART OF AN OVERALL Lack Enclosure design: https://www.thingiverse.com/thing:3129929 This is take two on the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
THIS IS PART OF AN OVERALL Lack Enclosure design: https://www.thingiverse.com/thing:3129929
This is take two on the Original PRUSA i3 MK3/MK2.5 MMUv2 Backfeed situation for those that are having issues with alternate mounting as I was.
This mount to attaches to the SPANNERHANDS Spool System spool holders. https://www.thingiverse.com/thing:2119644
Hardware Required:-
3 x M3x10mm/ per Backfeed device or spool.
2 x 4mm M10 Festo fitting.
1 x 220mm 4/2mm PTFE Tubing for between spool holder and Backfeed device.
Assemble and ensure 150mm between spools to ensure kinks don't happen between spools.
I have staggered my five which is sufficient.
Once assembled there should be almost no friction on rotating parts, clean as needed if not.
Rob
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament:
eSun PLA+
Notes:
Best to print:-rn ARMS on their end.rn Bases on their back (large flat side).rn Mount to be printed laying down how you would expect.rnrnrnVideos of printing with orientation.rnhttps://youtu.be/fiwr0IAoq0ornhttps://youtu.be/g4SzgS8h_SE
Category: 3D Printer Accessories