Original Prusa i3 MK3/MK2.5 MMUv2 SSS Backfeed Containment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
THIS IS PART OF AN OVERALL Lack Enclosure design: https://www.thingiverse.com/thing:3129929 This is take two on the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
THIS IS PART OF AN OVERALL Lack Enclosure design: https://www.thingiverse.com/thing:3129929
This is take two on the Original PRUSA i3 MK3/MK2.5 MMUv2 Backfeed situation for those that are having issues with alternate mounting as I was.
This mount to attaches to the SPANNERHANDS Spool System spool holders. https://www.thingiverse.com/thing:2119644
Hardware Required:-
3 x M3x10mm/ per Backfeed device or spool.
2 x 4mm M10 Festo fitting.
1 x 220mm 4/2mm PTFE Tubing for between spool holder and Backfeed device.
Assemble and ensure 150mm between spools to ensure kinks don't happen between spools.
I have staggered my five which is sufficient.
Once assembled there should be almost no friction on rotating parts, clean as needed if not.
Rob
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament:
eSun PLA+
Notes:
Best to print:-rn ARMS on their end.rn Bases on their back (large flat side).rn Mount to be printed laying down how you would expect.rnrnrnVideos of printing with orientation.rnhttps://youtu.be/fiwr0IAoq0ornhttps://youtu.be/g4SzgS8h_SE
Category: 3D Printer Accessories