1 / 5
Ender 3 - Dual lead screw linear rail kit for Z axis. — zdjęcie 1
1 / 5

Ender 3 - Dual lead screw linear rail kit for Z axis.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Currently supports only direct drive setup. NB! STILL A PROTOTYPE!

Ocena
5 / 5
Polubienia
96
Pobrania
472
Wydruki
4
Wyświetlenia
5162
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Instructions
Z axis linear rail kit for Ender3 style printers using dual Z lead screws. Rail mount is meant to be attached open side up. If you choose to use anti-backslash Z nuts, orient them upside down accordingly. Supports dual Z setup using only motor, belt synced or both at the same time.  Rail mount for single Z screw setup provided, but not tested. Compatible with my other models.

NB! : Use NEMA17 42x40 stepper motor in case of single motor dual Z. May require additional torque it provides. Additional Z stepper driver cooling may be useful also in dual motor setup.


Example print in photos
ABS, 0.2mm; 4x wall/top/bottom layers, 20% infill.


Additional hardware needed:

LINEAR RAIL KIT FOR Z AXIS
NameAmountComments
MGN12C linear rail  (300mm)2 
M3 8mm screws14+ 
M3 12mm screws2Per motor mount
M3 18mm screws2Per motor mount
M3 20x20 T-Nut8+ 
 
DUAL Z LEAD SCREW KIT
NameAmountComments
T8 lead screw (370mm)1Can fit 350-380mm
688RS bearings (8x15x5mm)4 
M3 8mm screws13+ 
M3 20x20 T-Nut8+ 
Bearing spacers (ID 8mm, OD 10-12mm)2(3)(Belt synced) Printable model provided
GT2 pulleys (6mm, 20 teeth, 8mm ID)(2)(Belt synced)
GT2 6x610mm belt loop(1)(Belt synced)
Compression spring ~1mm, OD:12mm(1)(Belt synced only) Length ~15-25mm
NEMA17 42x32 stepper motor(1)(Dual motor)
Z rod → stepper motor connector.(1)(Dual motor)
Stepper cable / Split stepper cable(1)(Dual motor)
 Z rod nut (Anti backslash)1(2)(Optional)

Tagi