Ender 3 - Dual lead screw linear rail kit for Z axis.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Currently supports only direct drive setup. NB! STILL A PROTOTYPE!
- Rating
- 5 / 5
- Likes
- 96
- Downloads
- 465
- Makes
- 4
- Views
- 5,122
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v3.0
Instructions
Z axis linear rail kit for Ender3 style printers using dual Z lead screws. Rail mount is meant to be attached open side up. If you choose to use anti-backslash Z nuts, orient them upside down accordingly. Supports dual Z setup using only motor, belt synced or both at the same time. Rail mount for single Z screw setup provided, but not tested. Compatible with my other models.
NB! : Use NEMA17 42x40 stepper motor in case of single motor dual Z. May require additional torque it provides. Additional Z stepper driver cooling may be useful also in dual motor setup.
Example print in photos
ABS, 0.2mm; 4x wall/top/bottom layers, 20% infill.
Additional hardware needed:
| LINEAR RAIL KIT FOR Z AXIS | ||
| Name | Amount | Comments |
| MGN12C linear rail (300mm) | 2 | |
| M3 8mm screws | 14+ | |
| M3 12mm screws | 2 | Per motor mount |
| M3 18mm screws | 2 | Per motor mount |
| M3 20x20 T-Nut | 8+ | |
| DUAL Z LEAD SCREW KIT | ||
| Name | Amount | Comments |
| T8 lead screw (370mm) | 1 | Can fit 350-380mm |
| 688RS bearings (8x15x5mm) | 4 | |
| M3 8mm screws | 13+ | |
| M3 20x20 T-Nut | 8+ | |
| Bearing spacers (ID 8mm, OD 10-12mm) | 2(3) | (Belt synced) Printable model provided |
| GT2 pulleys (6mm, 20 teeth, 8mm ID) | (2) | (Belt synced) |
| GT2 6x610mm belt loop | (1) | (Belt synced) |
| Compression spring ~1mm, OD:12mm | (1) | (Belt synced only) Length ~15-25mm |
| NEMA17 42x32 stepper motor | (1) | (Dual motor) |
| Z rod → stepper motor connector. | (1) | (Dual motor) |
| Stepper cable / Split stepper cable | (1) | (Dual motor) |
| Z rod nut (Anti backslash) | 1(2) | (Optional) |