Peg for Ikea shelves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was moving some old IKEA bookcases around and found myself missing some of the pegs needed to support the shelves.
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 264
- Wydruki
- 0
- Wyświetlenia
- 1160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was moving some old IKEA bookcases around and found myself missing some of the pegs needed to support the shelves. I checked yeggi but it seems there are several versions of those pegs around. In fact, I have two newer BILLYs that have much smaller holes and metal pegs compared to my older ones with plastic studs.
So I just pulled up Fusion and recreated the pegs I have on my shelves instead of trying my luck with existing models.
Print instructions
I used adaptive layer height but 0.2 should be fine.
Infill 40%.
Printed fine without supports
If you like what I'm doing…
… consider buying me a coffee or joining my Club.