Liczymy pasujące modele…
I wanted to spruce up my bookcase doors with some nicer doorknobs, so I whipped up two different versions in Fusion. Screws in easily and grabs the scew well. I would recomend to print these with atleast 4 walls, so make sure the inside…
Made these when I couldn't find strong enough manga/book risers for my use in my IKEA BILLY bookcase. I wanted to have an entire row across the back risen high enough room to read the titles (6cm high). I also wanted rows across the…
I put four of IKEA's “Billy” bookshelves in a room and found them to stand slightly unevenly, probably due to the uneven floor. Like every problem I encounter nowadays, there was a way to 3D print a solution! This little bracket did the…
A simple to print yet very sturdy and reliable cable clip for cable management. Designed for Ikea Besta, Billy, and other 18mm wide, or wider, furniture, boards, etc. You can still add and remove everything without catching on the cable…
If you found this helpful, please consider supporting me! Need a custom print? Contact me on Instagram @printsbymxtc Want to support my work? Donate here!
A new 3D figurine generated by AI, a Chibi Billy (Saw Puppet). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
A headphoneholder to mount on the left side of an 2024 Ikea Billy. Check out the original remix, there is a file so you can check if this holder will fit on your Billy without printing the whole model. I got some inspiration for the hook…
This is a custom-designed two-level display stand for IKEA Billy bookshelves, perfect for showcasing collectibles, models, or other small items. Features: Optimized for IKEA Billy: You can fit 4 stands side by side on an 80 cm shelf .…
My 3D-printable brackets turns your IKEA Kallax (and Billy if you want) into a properly organized board game shelf. No more unstable stacks. No more game-Tetris. Just clean, vertical storage. 🔧 What does it do? Mounts directly inside a…
A shelf holder pin for the Ikea billy shelf for adding non-original boards (i.e. without the hole for the notch). It uses a thin flap between the side and the board to increase the stability (without, it would just bend inwards). I…
I designed this clamp for the Ikea Billy bookshelves to display my books and manga. I have a couple of Billys in my house and found that the newer ones shelves are slightly thicker than the older ones, so I made two versions. The model…
DEUTSCH: Abdeckung für ein Ikea Billy-Regal, die seitlich eingebaute, flache Hohlraumdosen (für Lichtschalter oder Steckdosen) abdeckt. Der obere Lochkreis wird auf 102,5 cm, von unten aus gemessen, gesetzt, sodass der obere Teil der nur…
Upgrade your IKEA Billy shelf with this 3D printed cover plate designed to hide the visible shelf mounting holes. Its snap-on design gives your furniture a cleaner, more refined appearance by concealing unsightly openings. Since this is a…
Design Concept The SAW-Billy the Puppet Cookie Cutter & Embosser combines functionality and thematic design inspired by the iconic character from the SAW series. It is intended to imbue your baking with a distinctive horror touch. Use…
Mit diesem Adapter kann man ein Ikea Skadis an die Seitenwand des Ikea Billys anbringen, ohne dass man weiteres Material wie z.B. Schrauben oder Muttern braucht.
A new 3D figurine generated by AI, a Chibi Billy (Saw Puppet). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
Design Concept This 3D model is inspired by Billy the puppet from the SAW movie franchise, designed as a wall decoration for Halloween or horror-themed environments. The exaggerated facial features and iconic spiral cheeks are intended to…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
Ready for Born Again S2 Around life sized Perfect for Daredevil cosplays
Soporte para muestras de filamento para la estantería Billy de IKEA. Es una manera muy útil de tener ordenado el filamento y saber que color es cada uno. Esta diseñado para usar cualquier muestra de filamento de 24mmx24mmx2mm. Ajusta…
This is a simple model to allow you too route cables through the back of your IKEA Billy Shelf. You should be able to route 2 normal sized US cables through the hole and a bunch of little other cables. Scale the X and Y to 125% if you…
There are plenty of these out there, but they all had something I didn't like or fit the wrong conduit, so I worked one up for the 1/2" I had on hand. I printed it in PETG and it's held up fine.
Billy is thinking "There's something out there waiting for us, and it ain't no man. We're all gonna die." Yes, Billy, sooner or later cross the river Styx.
Hillbilly Banjo Gnome Bring a little backwoods charm to your shelf, garden, or desk with this cheerful Hillbilly Banjo Gnome. With his big beard, patched-up outfit, chunky boots, tall hat, and trusty banjo in hand, he looks ready to start…
Manga shelf riser for the narrow billy bookcase. Takes 2 to cover the distance. I used One Piece manga as the reference so volume numbers are still visible. At least for this series, other series won't be so fortunate/
Variation of an IKEA Billy Grip. There are some versions in the STLs. Choose your favorite. For the door handle you would need: 1x covered + 1x covered mirrored (or mirror it yourself - I just wanted to make your life a little more easy)…
Here is the model for Billy Bear. Billy is a good but Spooky Friend of Barry, and is REALY into Scary Movies. And like his friend he seems to just want to be your friend too, do you have space for Billy? maybe he can keep Barry Company. I…
If you print this on the large flat you can do it without and support, it should end up being stronger in this orientation as well. I used PETG at 100% infill. I would suggest something at least this strong, or stronger. I can't speak to…
Holder for Prusa steel sheets for MK printers. Holds 2 sheets. As you can see in the pictures I printed 4 of them. Then I inserted them into the existing shelf holes with 6 empty holes in between. I printed it with PLA and a 0.2mm layer.
Cache-charnières personnalisé pour étagères IKEA BILLY Protégez vos livres et personnalisez vos étagères BILLY ! Matériau : PLA (écologique et durable) Compatibilité : Toutes les imprimantes 3D FDM Fonction : Cache les charnières…
IKEA Billy support for 10mm rod to store 3D filaments
We recently purchased a Billy bookshelf from IKEA, and added Oxberg doors to create a wonderful board game cabinet. We also have a toddler. Hence the IKEA Oxberg Latch The rubber bands we were using before worked, but were tacky. Now we…
The IKEA Billy bookcase 203.238.05 comes with a wooden "knob" to open the doors. I found this neither ergonomic nor aesthetically pleasing, so I wanted to replace it with a brushed satin drawer pull. The drawer pull I'm using is 3" (76mm)…
Zum Zusammenbauen schieben sie einfach die Feder in die Nut und stecken sie von der Rückseite eine M3 Mutter (M3nS oder DIN 562) in die dafür vorgesehene Öffnung. Anschließend sichern sie das Herausfallen der Feder mit einer M3 x 6mm…
A Spool Holder which mounts directly into the side of a IKEA BILLY Shelf (28mm depth). (Update 24.10.2025: Added a Longer Version with PTFE Tube Guides) Included Versions are: Normal Version Normal Version with PTFE Tube Guide for loose…
I would like to present you my Halloween project, which is Billy from the Saw series , I made it in FDM technology, it includes an RGB LED strip, a controller, and an output for an IR diode. The project requires: Filaments in recommended…
I liked grizziel17's model, it's very simple and designed to print without supports. Note: this is for a custom cut shelf to fit an IKEA Billy bookcase, it is not meant to be used with IKEA shelves with the round cut-out for the IKEA pins…
This sturdy, modified hook is designed for attaching lightweight items to Oxberg doors on IKEA Billy bookcases. This remix features thicker sides for improved strength and durability, making it easier to print.
Also fits at least older IKEA desks with table tops of the same thickness (~19mm) Added a blunt version of the hook that prints without supports. Works fine with clothes hangers.
Super simple bracket to keep your toddlers away from the Billy bookshelf covered with doors. Easily print without support with PLA.
Ghost Rockabilly to print in separated pieces. -Head -Torso -Left Arm -Right Arm 20cm tall Here moore models / Aqui mas modelos. https://cults3d.com/es/usuarios/Artoys3dPrint/modelos-3d Follow me in Cults :) Category: 3D Printing
Modeled after: https://www.printables.com/model/759616-ikea-billy-shelf-pin-34mm with increased pin size going into the shelf itself for a stronger fit. I would maybe recommend getting the original metal ones for the strongest hold, but…
Reused IKEA Billy shelfs and get extra space in your kictack by adding it to any 75cm table, I designed it for IKEA Vangstad but it would fit any table of 75cm size. I printed it using 15% infile and it is a little bit bit wobbly. If I…
Pairs of shims are available in 1mm increments up to 10mm. If not printing the pair, be sure to select the correct side. They are not interchangeable.
We have plenty of shelves and lots of space, but we’re a household full of book lovers. Slowly but surely, we’re running out of space in a sustainable way, and despite having many eBooks, new physical books keep joining our collection.…
Sturdier version that doesnt bend so easily and slip off, handles the weight of a pair of jeans. Printed with AddNorth PETG Black, 30% infill. Shelf height: 19mm.
This is a mount for the IKEA VALLHORN Motion Sensor. Mont for Billy, Kallax and Hemnes.
Ikea Rodret Magnetholder for Kallax and Billy, Magnets 2 x 6x2 mm
Print in Nylon standing up, with the bigger base to the bottom, with a two layer skirt at a distance of 0.1mm from the object. This will give the necessary adhesion, but the skirt will be easier to remove from the print-bed than a brim.…
It is a remix of the ikea billy holder, so that anyone can attach their needed hooks or whatever, without big editing. No matter on which side of the Billy the holder should be placed. There is also a file to print if you dont know if the…
2/25 update: added a new bracket for 5/8 inch rod =============== This is my shelf bracket remix from macmanluke's work to use existing peg holes in Billy bookcase for 1/2 inch rods with topside open so it can hold 5 spools easily for 15…
This allows for the Plano Stowaway 3700 tackleboxes to be hung in the 15 ¾" (40cm) Billy Bookcase using the pin holes. I have mine spaced every 2 pin holes and it gives the perfect spacing. Print as oriented with organic tree support on…
this is Billy the swordsman a fat ball with a sword and shield never tired printing him without supports so I don't know if you can he's small so you might want to scale him up that's what I did the one on the left is not scaled up the…
This is a simple shelf I made to add a little more room to my billy bookcase. If you want a different size or a shelf made for your bookcase, just let me know.
A shelf holder pin for the Ikea billy shelf for adding non-original boards (i.e. without the hole for the notch). It uses a thin flap between the side and the board to increase the stability (without, it would just bend inwards). I…
This model is compatible with the lego system.
Karlson was a few years ago one of the most hyped games on Steam at the detriment of its author. Indeed, Dani crumbled under the pressure he built up by hyping his game in the making. It came to the point where anywhere he went, he was…
Ein kleiner alternativer Türgriff für ein IKEA Billy-Regal. Ich habe zur Befestigung die vom Regal mitgelieferte Schraube verwendet. English: A small alternative door handle for an IKEA Billy shelf. I used the screw supplied with the…
hello everyone. i have designed a few embellishments for the ikea billy shelf. for example this mount for led strips. you can easily draw two strips. either 2 in one direction or once there and once back. you have to be careful because…
As for the 80cm billy version you need thicker rods, I recommend buying the 12mm alloy tubes or even better 12mm steel tubes. But feel free to use the 10mm ones for smaller cupboards. The M5x16 screws are the ones which you get easily in…
I designed this clamp for the Ikea Billy bookshelves to display my books and manga. I have a couple of Billys in my house and found that the newer ones shelves are slightly thicker than the older ones, so I made two versions. The model…
We have a some Billy bookcases set up as lockers and I was looking for a way to hang keys in them without damaging the bookcase. A didn't see anything like I was looking for so came up with this quick model. There are 3 different…
Modify the original design to be able to use 25 mm PVC pipes,
A cover for the IKEA Billy knob. I needed some force to push the knob cover over the original knob, so i used a screw clamp.
Elements for mounting a photography background roll on Billy/Oxberg shelves. Features: Simple design No modification to the shelf required No additional parts needed, works straight after printing Print Settings: Material: PLA or PETG…
Kindersicherung IKEA Billy / Parental control IKEA Billy
A fan made Billy with adjustable legs! I printed him at: Size 121.94% but 100% should work fine. Material : PLA (any should work, just be careful with the leg joints) Supports: Yes Print the legs like this so the (cylinder) joins print…
The thread is for a drill bit guide used in a jig. This one is M14x1.5.
This Billy Butcherson tombstone is a replica of the movie original tombstone in the Hocus Pocus movie. If you are looking to be able to make the tombstone with a CNC Router in High Density Polystyrene (R-10 Insulation foam board), you can…
Whatever you do DO NOT put a small firecracker (or explosives) in the break action chamber on the back. (BEWARE OF POWDER BURNS)
Billy Shelf pins or nipples or what they call it for new shelves in old billy shelf . Printed on the flat surface without supports , brim recommended
DEUTSCH: Abdeckung für ein Ikea Billy-Regal, die seitlich eingebaute, flache Hohlraumdosen (für Lichtschalter oder Steckdosen) abdeckt. Der obere Lochkreis wird auf 102,5 cm, von unten aus gemessen, gesetzt, sodass der obere Teil der nur…
download the zip file it has a material list plus both versions of this model, and some pictures. have made a uploade the batton for the wheel system. v3 has smaller wheels and and will not get stuck in the baton
Upgrade your IKEA Billy shelf with this 3D printed cover plate designed to hide the visible shelf mounting holes. Its snap-on design gives your furniture a cleaner, more refined appearance by concealing unsightly openings. Since this is a…
With these drill guides, you can add additional holes for the fixed middle shelf of IKEA Billy. That way, it will hold five rows of file folders (LEITZ® or similar). I designed it so you can instantly see if you aligned them wrong -…
Got too many Billys and not enough shelf holes? Fear not - Billy Drill Buddy is here to save your sanity and your bookcases. This model is a precision drill template designed specifically for IKEA’s "Billy" bookcase. It helps you add exta…
These are brackets for IKEA Billy to insert rods for storing filament spools. They are based on the version from Marcus Hansson build for his article "Filamentschrank" in the Make 1/25 Magazin. I added version for 12mm and 15mm aluminum…
Hi there! Here's a hinge to mount your Ikea SKADIS Board onto the Billy Bookshelf, allowing you to open it to the side whenever you'd like to access the Shelf's content. Since I didn't have much wall space for easy access to the Skadis…
This is the FilaBilly Dehumidifier. It's a compact smart device that exracts water from the air. It's meant to be used in an airtight cabinet to create a low humidity environment for 3D printer filament. This is the first part of a larger…
A blank, matte-white model of the playful Billy Balls (Craspedia) flower, designed for your creative painting. This DIY collectible captures its cheerful, round form in a smooth, minimal style—perfect for adding a touch of fun and…
The whole thing was uploaded once as a complete part and divided into two parts which should fit most printers in terms of size
Elements with 2 or 3 hooks mountable to Billy shelves without screws or any tools. Usable for hanging jackets. it uses the slight overhang of the side pieces on the top for stability. The design has sufficient space for two sided tape for…
These are wedges that can be used to level an IKEA "Billy" bookshelf on uneven floors. This is useful when you for example have an older floor that is sloping away from the wall, causing the bookshelf to also tilt outwards. You use them…
Bring order to your Billy shelf – with this slim, custom-designed file and magazine holder! This model is precisely tailored to fit the IKEA Billy shelf , making it ideal for neatly organizing loose papers, magazines, notebooks, or A5…
You accidentally mounted the top plank from the wrong side, so that the plastic eccentric wheels are visible? Same happened to me of course. Here are covers for it. But they are also useful for the extension units. Unfortunately IKEA…
After installation you usually want to screw your IKEA Metod/Billy cabinets together. I use M4 x 35 mm furniture screws (also “furniture connectors”) with a hex drive for that, because both IKEA Metod and IKEA Billy have a wall thickness…
I really don't like the original corner fittings, also they don't allow usage of the original height extension units, so I created this alternative part which replaces 401.041.09. I recommend to use three of them, one at top, one in the…
Tired of only seeing the spines of your favorite manga? So was I! That's why I designed this simple and sleek bookshelf bracket to showcase the beautiful cover art of your collection. Now you can proudly display your favorite volumes in…
This is a short zipper pull designed for Billy Shoes that have zippers to close them. Or any zipper for that matter. The hole in the zipper pull is big enough for a single finger to grab it with. A little difficult to install, but not…
Default raise value is 5mm but can be adjusted in the fusion file.
