1 / 1
Ikea Billy Shelf Holder Pin for non-original boards — zdjęcie 1

Ikea Billy Shelf Holder Pin for non-original boards

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A shelf holder pin for the Ikea billy shelf for adding non-original boards (i.e. without the hole for the notch).

Ocena
0 / 5
Polubienia
3
Pobrania
40
Wydruki
0
Wyświetlenia
183
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A shelf holder pin for the Ikea billy shelf for adding non-original boards (i.e. without the hole for the notch). It uses a thin flap between the side and the board to increase the stability (without, it would just bend inwards).

I printed mine in PLA and the shelf is holding up very well with >20kg of locks on it.

Print orientation as in the stl file with the diagonal part on the printing surface. 

Tagi