IKEA BILLY Spool Holder with PTFE Tube Channels + PTFE Tube Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Spool Holder which mounts directly into the side of a IKEA BILLY Shelf (28mm). Multiple versions available.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A Spool Holder which mounts directly into the side of a IKEA BILLY Shelf (28mm depth).
(Update 24.10.2025: Added a Longer Version with PTFE Tube Guides)
Included Versions are:
- Normal Version
- Normal Version with PTFE Tube Guide for loose rolls of Filament
- Longer Version for bigger Spools
- Longer Version with PTFE Tube Guide for loose rolls of Filament
- Separate PTFE Tube Guide (Full and Slim)
For screwing the Spool Holders or the PTFE Tube Guide into the already existing holes in the BILLY Shelf, I recommend M4 x 16mm Wood Screws (Self Tapping Screws).
The Spool Holders uses 3x PTFE Tubes (cut to length) to provide optimal rolling capabilities for the Filament Spools.
Print as oriented - flat on the bed; This way, the layer lines form a very rigid shape and are very unlikely to break. I recommend printing it out of PETG with a minimum of 4 Walls and 15% Cubic Infill. All Files provided are already correctly oriented.
Side Note: You can Flip/Mirror the PTFE Tube Guide in the Slicer, if you need another orientation.
This Spool Holder is intended to be mounted inside the 28mm deep version of a IKEA BILLY - not the 40mm one! Although the model could certainly be remixed for the deeper 40mm BILLY.
