Springfield Hellcat (standard picatinny rail) 9mm Side Light Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and easy light access for dark nooks of the house without ever leaving your natural gun grip that wont break the…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 1635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Quick and easy light access for dark nooks of the house without ever leaving your natural gun grip that wont break the bank.
requires:
2x M3x20 screws
1x M3x12 (I think that a 10 would fit)
3x M3 Nut
made to fit Olight I3T EOS but I am sure that any light that would fit with similar dimensions. The hole for the light is 5/8 or 15.875mm. Depending on how tight you get the screws to mount it should fit nice and snug, however if you wrap the back of the light or the mount with a little tap you should have a nice snug mount.
the Olight has two light modes. low isn't very bright. double clicking the back will put it into high which is plenty bright.
Here is a link for the light: https://www.amazon.com/gp/product/B07DLRK7Q5/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07DLRK7Q5&linkCode=as2&tag=learningasw05-20&linkId=e94aa1ce5bbc4996fcbe5dc69ea7babc
I printed in PLA (SUNLU white) with 30% infill and no supports. Not sure how it holds up to firing and I have heard that PLA will also loosen with time. I would recommend PETG or ABS.
Will upload a left hand if some one requests it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
no
Resolution:
0.2
Infill:
30%
Filament: recommended PETG or at least PLA+
Category: Sport & Outdoors