1 / 4
Clone Hero controller — zdjęcie 1
1 / 4

Clone Hero controller

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D printed guitar to play Clone Hero "Inserts for Fret switches" printed part

Ocena
4,4 / 5
Polubienia
84
Pobrania
549
Wydruki
4
Wyświetlenia
6940
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

I've been wanting to get into Clone Hero but controllers are expensive these days. There are options out there for 3D printed controllers but none of them were quite what I was looking for exactly. 

I ended up remixing two different models into one and making some changes to them.

For the main body of the controller, I used the body from this model.

For the frets part of the controller, I used the Polybar frets. 

I then put the two parts together and did some remixing.

Here are some of the changes I made:

  • All of the screws in the build are now M3 size which is typically more common for 3D printed projects.
  • For fasteners, the printed parts now have slots for heatset inserts instead of spaces for nuts.
  • The strum bar mount is now modular. The strum bar sits on its own platform which then gets screwed into the main body of the controller. This way, if the strumbar's mount breaks during use you can easily replace it without reprinting the entire body again.
  • Resized the buttons so that they work with the more common type of keyboard switch

 

Materials needed:

Tagi