1 / 4
Clone Hero controller — image 1
1 / 4

Clone Hero controller

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 3D printed guitar to play Clone Hero "Inserts for Fret switches" printed part

Rating
4.4 / 5
Likes
84
Downloads
548
Makes
4
Views
6,935
Reviews
5

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Noncommercial

I've been wanting to get into Clone Hero but controllers are expensive these days. There are options out there for 3D printed controllers but none of them were quite what I was looking for exactly. 

I ended up remixing two different models into one and making some changes to them.

For the main body of the controller, I used the body from this model.

For the frets part of the controller, I used the Polybar frets. 

I then put the two parts together and did some remixing.

Here are some of the changes I made:

  • All of the screws in the build are now M3 size which is typically more common for 3D printed projects.
  • For fasteners, the printed parts now have slots for heatset inserts instead of spaces for nuts.
  • The strum bar mount is now modular. The strum bar sits on its own platform which then gets screwed into the main body of the controller. This way, if the strumbar's mount breaks during use you can easily replace it without reprinting the entire body again.
  • Resized the buttons so that they work with the more common type of keyboard switch

 

Materials needed:

Tags