Sipeed Maix frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple frame to hold the parts together. Fits Maixduino and Maix Bit boards. The TFT display is held in place by a…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Simple frame to hold the parts together. Fits Maixduino and Maix Bit boards. The TFT display is held in place by a click-in frame. There are two frame versions with slightly different cutouts. You may have to widen the FPC cable cutout by 3 mm using a sawblade at "24" side. This is corrected on the Tinkercad site already. M2 screws are used, head thickness should be 1 mm or less (file off).
Maixduino: camera holder must be glued into the frame as seen on photos. I have not used the 4th screw at the camera connector but the hole is there.
Maix bit: has a simple 5x7 cm PCB with two socket rows holding the computer board.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8i11kbBh1g9
Category: 3D Printing