Sipeed Maix frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple frame to hold the parts together. Fits Maixduino and Maix Bit boards. The TFT display is held in place by a…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Simple frame to hold the parts together. Fits Maixduino and Maix Bit boards. The TFT display is held in place by a click-in frame. There are two frame versions with slightly different cutouts. You may have to widen the FPC cable cutout by 3 mm using a sawblade at "24" side. This is corrected on the Tinkercad site already. M2 screws are used, head thickness should be 1 mm or less (file off).
Maixduino: camera holder must be glued into the frame as seen on photos. I have not used the 4th screw at the camera connector but the hole is there.
Maix bit: has a simple 5x7 cm PCB with two socket rows holding the computer board.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8i11kbBh1g9
Category: 3D Printing