Simple Nerf Rail Torch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print is a simple (really simple) torch mount for Nerf Rails. Designed to print with no supports.
- Ocena
- 4,75 / 5
- Polubienia
- 36
- Pobrania
- 265
- Wydruki
- 8
- Wyświetlenia
- 1357
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Simple torch mount for Nerf Elite Rails
This print is a simple (really simple) torch mount for Nerf Rails. Designed primarily for the cheap 9LED torches found in camping/hardware shops.
This print is a simple (really simple) torch mount for Nerf Rails. Designed primarily for the cheap 9LED torches found in camping/hardware shops. Parts needed are:
- 2 or 3 Cable Ties
- M3 Bolt 25mm long
- M3 Nut
- Torch
- Nerf gun
How does it work?
The hole takes a M3 bolt through it and is designed to sit in the dips/divots on the Nerf Rail. This prevents the attachment from falling off. The 3 holes on the side are for cable ties to hold the torch in place.
Please note that this only works with Elite Rails and has only been tested on a Stryfe.
This is designed to print without supports upright, which also allows for the greatest strength for holding the torch.
What are the files?
There are 2 files with this, marked Tight and Loose. This is to take into account painted and unpainted Nerf guns. If you have a painted Nerf gun, select Loose. Unpainted takes Tight. I do not give any guarantees that it won't scratch off paint, use at your own risk. The differences are also marked on the model with a small 'T' or 'L' on one end.
Can I sell this?
Sure! Let me know how well it sells!