Simple Nerf Rail Torch Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print is a simple (really simple) torch mount for Nerf Rails. Designed to print with no supports.
- Rating
- 4.75 / 5
- Likes
- 36
- Downloads
- 265
- Makes
- 8
- Views
- 1,357
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
Simple torch mount for Nerf Elite Rails
This print is a simple (really simple) torch mount for Nerf Rails. Designed primarily for the cheap 9LED torches found in camping/hardware shops.
This print is a simple (really simple) torch mount for Nerf Rails. Designed primarily for the cheap 9LED torches found in camping/hardware shops. Parts needed are:
- 2 or 3 Cable Ties
- M3 Bolt 25mm long
- M3 Nut
- Torch
- Nerf gun
How does it work?
The hole takes a M3 bolt through it and is designed to sit in the dips/divots on the Nerf Rail. This prevents the attachment from falling off. The 3 holes on the side are for cable ties to hold the torch in place.
Please note that this only works with Elite Rails and has only been tested on a Stryfe.
This is designed to print without supports upright, which also allows for the greatest strength for holding the torch.
What are the files?
There are 2 files with this, marked Tight and Loose. This is to take into account painted and unpainted Nerf guns. If you have a painted Nerf gun, select Loose. Unpainted takes Tight. I do not give any guarantees that it won't scratch off paint, use at your own risk. The differences are also marked on the model with a small 'T' or 'L' on one end.
Can I sell this?
Sure! Let me know how well it sells!