3/8" microphone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to hold microphone with 3/8" screw mount
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 175
- Wydruki
- 3
- Wyświetlenia
- 1295
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my own design that I'm copying over from Thingiverse here. (Created account here because I've been finding Thingiverse buggy).
I wanted a small mic stand that could be used on a table / desk.
I made this with 3/8" thread because my microphone holder has this adaptor (5/8" thread is a much smaller pitch so more difficult to print).
2 nuts need printing, one to fix the mic to the threaded rod, and the other to fix the base to stop either from spinning.
Print Settings
Printer brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Resolution:
0.18
Infill:
20%
Filament brand:
Ice Filaments
Filament color:
Black / Clear
Filament material:
PLA
Notes:
Printed with 4 perimeters. rnrn0.5 mm nozzle
Post-Printing
I had to use a knife to remove the 'elephants foot' from one end of the threads.