Shower Head Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I no longer wanted to keep buying a new holder for my shower head. So I designed and printed these three parts. "FDW"…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I no longer wanted to keep buying a new holder for my shower head. So I designed and printed these three parts. "FDW" is printed in PETG (Anet AM8). The other two parts were made out of resin (Nova3D).
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
10
Filament: Surreal PETG white
Notes:
The other two are printed with a resin printer. When using resin, consider the shrinkage rate of the material and use a more flexible resin! I "stretched" mine with 10 - 25% flex resin. This resulted in a shrinkage rate of about 7%. So I enlarged the parts in the slicer by 7%.
The specified print settings are those for PETG printing. If you print from the inside out, you don't need any support for an orientation like in the picture.Category: Bathroom