Shower Head Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I no longer wanted to keep buying a new holder for my shower head. So I designed and printed these three parts. "FDW"…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I no longer wanted to keep buying a new holder for my shower head. So I designed and printed these three parts. "FDW" is printed in PETG (Anet AM8). The other two parts were made out of resin (Nova3D).
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
10
Filament: Surreal PETG white
Notes:
The other two are printed with a resin printer. When using resin, consider the shrinkage rate of the material and use a more flexible resin! I "stretched" mine with 10 - 25% flex resin. This resulted in a shrinkage rate of about 7%. So I enlarged the parts in the slicer by 7%.
The specified print settings are those for PETG printing. If you print from the inside out, you don't need any support for an orientation like in the picture.Category: Bathroom