Variable clothes rail (front-to-back with aluminium tube)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
clothes rail mounts with front-to-back orientation designed for IKEA BESTÅ - use regular hangers in 40cm depth wardrobe
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Use a 40cm depth IKEA BESTÅ as small wardrobe: just put (glue) a clothes rail in front-to-back orientation under the top board.
Length can be variable adjusted by changing the tube dimensions. Other tube diameters can be easily used by linear scaling. Not limited to IKEA ;)
Additional parts
- 4x screws
3x20mm(tube mounting) - 4x
19x50mmdouble sided tape (tesa Powerbond® ULTRA STRONG) 30x2mmaluminum tube (33cm length for BESTA)
Print instructions
For optimal results, use your custom printer settings with the 3mf file!
Used print settings (gcode+photos)
- Layer height:
0.2mm - Adapter-Orientation: regular
- Material: BASF Ultrafuse PRO1 (transparent)
- Supports: no
Suggested print settings
- Layer height:
0.10-0.20mm - Material: Tough-PLA/PETG
- Supports: no
NOTES
The dimensional accuracy is critical! Depending on your material, scaling might be necessary! (use negative horizontal expansion in case the clamp or screws are not fitting)