Port Vents with Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
vents to cool my diesel heater
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I noticed that my diesel heater was over heating at max after 2 hours at time. With two of these mounted to the outter shell I was able to keep the diesel heater running at level 6 all night without. I have larger version that I will put up in a bit later but for now, this one is 6 cm.
There is 3 pieces; one for the port, one cover and one angled port cover. when I am using it, I run it with the vent cover pointed to the ground to prevent rain from getting in.
I leave this diesel heater mounted to the outside of my truck overlanding and the covers work well.
I recommend you usee PETG to prevent the UV degrading the print. 20% infill with 0.4mm nozzle, 0.2mm layer height and no support required.
Let me know if you have any issues.