Raspberry 3 A+ Case for Prusa i3 MK3/S with camera cable slot.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the original design of Jonlynn (link at the end).
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 129
- Wydruki
- 2
- Wyświetlenia
- 3248
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the original design of Jonlynn (link at the end). I took his designed and add a slot for the Pi Camera and a perpendicular arm that fits the Prusa i3 Frame.
Print instructions
This is a remix of the original design of Jonlynn. I took his designed and add a slot for the Pi Camera and a perpendicular arm that fits the Prusa i3 Frame.
Printed in PETG.
You will need 2x M3x10mm screw to attached the case to the frame. I highly recommend this M screw nuts set from Aliexpress. Is very useful for a lot of different projects.
So far, Octopi is running great on the Raspberry Pi 3A+. I connected the Raspi to the printer using a short Usb cable that I bought in Aliexpress.
I do recommend to buy the original Raspberry power supply of 5V 2.5A. I tried to use other PSU for this and I had always the power alert on Octopi. If you are going to modified the cable for the power be sure to use a 18AWG cable, not less.
Original Design by Jonlynn:
https://www.thingiverse.com/thing:3244526
Thingiverse link:
https://www.thingiverse.com/thing:3665164