Raspberry 3 A+ Case for Prusa i3 MK3/S with camera cable slot.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the original design of Jonlynn (link at the end).
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 129
- Makes
- 2
- Views
- 3,248
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the original design of Jonlynn (link at the end). I took his designed and add a slot for the Pi Camera and a perpendicular arm that fits the Prusa i3 Frame.
Print instructions
This is a remix of the original design of Jonlynn. I took his designed and add a slot for the Pi Camera and a perpendicular arm that fits the Prusa i3 Frame.
Printed in PETG.
You will need 2x M3x10mm screw to attached the case to the frame. I highly recommend this M screw nuts set from Aliexpress. Is very useful for a lot of different projects.
So far, Octopi is running great on the Raspberry Pi 3A+. I connected the Raspi to the printer using a short Usb cable that I bought in Aliexpress.
I do recommend to buy the original Raspberry power supply of 5V 2.5A. I tried to use other PSU for this and I had always the power alert on Octopi. If you are going to modified the cable for the power be sure to use a 18AWG cable, not less.
Original Design by Jonlynn:
https://www.thingiverse.com/thing:3244526
Thingiverse link:
https://www.thingiverse.com/thing:3665164