PiCam: Camera Housing & Arm | 20x20mm alu profile attachment | Octoprint Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Raspberry Pi Camera. Can be attached - using balljoints - to the printers' 20x20mm aluminium extrusions.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 494
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
A case for the standard Raspberry Pi Camera often used with Octoprint. It can be attached - using balljoints - to the printers' 20x20mm aluminium extrusions that most Ender 3 clones have.
If you like check out my Raspberry PiCase that goes nicely together with this camera mount: https://www.printables.com/de/model/349271-picase-raspberry-pi-4-case-with-fan-mount-octoprin
Printing
I printed the balljoints “upside-down” (the head down and the opening up) and with a brim. This worked out really well! Everything else should be straightforward.
Assembly
The PiCam goes into its casing. The casing is bolted together from the back together with the balljoint mount (balljointattachment_v2.stl) to the lid using M3 bolts. The bolts just screw into the plastic of the lid and create their own threads doing so. Don't worry, this works surprisingly well - also for plenty reattachments if needed.
The PiCam04_20x20mm aluminium profile attachment.stl is attached to the profiles using four “M3 T slot nut”s - you'll find plenty of designs on Printables.
Sometimes the balljoints get a bit loose. I recomment putting a bit of electrical tape or similar on each balljoint head for the to stay rigid if you get this problem.
If you use this design you'd make my day if posting a make of it :) Happy printing - and print watching using your new camera!