Bed Leveling Knob - Heat-set Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bed-leveling knob I designed for M3 heat-set inserts
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I know, there are a lot of bed leveling knobs already. I wanted to design this one to:
- be easy to print
- be designed for printed strength (rather than copying aluminum designs)
- use inserts (rather than nuts, which I tend to accidentally glue on the inside)
- gain practice as a new modeler
I've had these knobs on my printer for a month and haven't had any problems: The plastic scrapes against the bed mount enough to keep the level stable; I have only needed to adjust the leveling after moving the printer to my other work bench or swapping build plates.
The M4 inserts I used are pictured, 8mm long, and 5.8mm diameter holes turned out to be perfect for setting these with a soldering iron. If you have inserts with different diameter, you may easily adapt the file by changing the diameter in the sketch on Onshape (link) and then exporting the part.