Polymaker Cardboard Spool Enhancer / Bushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plastic bushing that clips to the Polymaker Cardboard Spool
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I'm using a Prusa Mini with the base kits where the spool goes under the printer. Recently, Polymaker started shifting from plastic spool to cardboard one. I thing it's a good thing to limits plastic wastage. The things is that it isn't working super well with the Mini base. The spool grips too much and lead to print failure. So I designed these plastic bushing that solve the issue.
You will need to prints 3 of them for each spool, they can fit on the same bed. I recommand to use PETG since is very slippery.
Compatible with Polylite/Polymax cardboard spool. It won't works with Polyterra as they are using a different spool.