Pivot: Bolt and Bearing Collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You'll notice a lot of rigid prints out there, but not here! With some M10 hardware and bearings things are movin'.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 680
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This bolt and bearing collection allows you to use M10 bolts, washers, and nuts, along with a few cleverly placed 6000 series bearings to create dynamic/kinetic creations! Designed for use with lengths of 38mmx38mm (2"x2") wood.
If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you. https://www.patreon.com/oddinventor
What's Included:
9 different configurations of bolt and bearing joint models are included with this collection, which... in different combinations, let you accomplish quite a lot. These parts are foundational to a lot of our prototypes.
- End Inline Bearing
- End Inline Bolt
- End Offset Bearing
- End Offset Bolt
- End Through Bolt
- Middle Inline Bearing
- Middle Inline Bearing 90°
- Middle Inline Bolt
- Middle Inline Bolt 90°
What Else You'll Need:
- 60mm long M10 bolts (or 120mm if you plan on spanning 3 pieces)
- M10 locking nuts
- M10 washers
- 6000 series bearings
Printing Tips:
The bearing and bolt-head holes are sized with 3D printer tolerances in mind, but sometimes you'll need to do a little cleanup at the tops of those holes if your printer isn't stellar at overhangs.