Google Pixel Promount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 11/30/2016 I added the swivel head design. It should take an M3-14 screw and an M3 nut (or nylock nut). This is…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 11/30/2016
I added the swivel head design. It should take an M3-14 screw and an M3 nut (or nylock nut).
This is a charging vehicle dock for the Google Pixel. Mounting pattern matches a ProClip USA vehicle mount. USB-C port sized for iOrange Car Rapid Charger. There is a cutout to guide you to the fingerprint reader and a ledge to access the buttons.
Please note: you will need to buy or create your own mount to your vehicle, this mount fits the phone and charger and provides a 3-hole mounting pattern.
Print Settings
Printer:
Duplicator I3 v2/Monoprice Maker Select
Rafts:
No
Supports:
Yes
Resolution:
Medium
Infill:
60
Notes:
Printed with Monoprice PETG at 248C on Aquanet coated glass bed heated to 78C. Supports only for the USB-C pass-through, speaker and microphone ports.
Category: Electronics