1 / 3
6mm Wheel Hub (Inspired by Pololu 1083) 4M Custom Holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hubs that I designed for my 6mm motor shaft.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A hybrid of the Pololu 1083 wheel hub that is also compatible with hex shaped traxis wheels. Created a clamping version since PLA doesn't grip the metal well enough.
- Hub can be hammered down but will lose it's grip after taking it on and off. Use the clamp mechanism when it loses grip
- Hub uses 4Mx16 screws through the center with a 4M nut
- Hub and Adaptor is fastened together with a 4Mx6 screw.
- Adaptor uses a 3Mx10 screw (or longer) as a set screw
- Smaller hole next to it is redundant as I find screws will not create enough threading to clamp down. Maybe you'll have better luck than me
