1 / 3
6mm Wheel Hub (Inspired by Pololu 1083) 4M Custom Holes — image 1
1 / 3

6mm Wheel Hub (Inspired by Pololu 1083) 4M Custom Holes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hubs that I designed for my 6mm motor shaft.

Rating
0 / 5
Likes
1
Downloads
54
Makes
0
Views
347
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

A hybrid of the Pololu 1083 wheel hub that is also compatible with hex shaped traxis wheels. Created a clamping version since PLA doesn't grip the metal well enough.

 

  • Hub can be hammered down but will lose it's grip after taking it on and off. Use the clamp mechanism when it loses grip
  • Hub uses 4Mx16 screws through the center with a 4M nut
  • Hub and Adaptor is fastened together with a 4Mx6 screw.
  • Adaptor uses a 3Mx10 screw (or longer) as a set screw
  • Smaller hole next to it is redundant as I find screws will not create enough threading to clamp down. Maybe you'll have better luck than me