SSD Caddy Cage - Fits Corsair 280x Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Summary: I have a Corsair Crystal Series 280x mATX PC case, but I made a 3d-printed wall mount PC. The case came with…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 841
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Summary:
I have a Corsair Crystal Series 280x mATX PC case, but I made a 3d-printed wall mount PC. The case came with SSD and HDD caddies that I wanted to implement in my build, but only needed one slot and couldn't find an STL for the SSD cage online. I tried to make it look similar to Corsair's design.
Printing:
Don't use PLA or any other material with low heat resistance. I used PETG and it works fine. ABS is probably better.
Your print orientation should match the 3rd picture. If you do this and set your slicer to 2+ perimeters, the printer shouldn't need to do any infill.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.3
Filament:
Eryone PETG
Orange
Category: Computer