Dice Tower V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an improved version of the Dice Tower made by JonesSepp.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 200
- Wydruki
- 4
- Wyświetlenia
- 1552
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
This is an improved version of the dice tower made by JonesSepp. https://www.printables.com/model/74357-dice-tower
The changes I have made are reinforced arms on the cases and I made a cut away in the base of the Tower to allow the cases thicker arms to still open completely.
The tower and the two cases are both easy to print. I used PLA with a layer height of 0.2mm on a 0.4mm nozzle.
I was able to print all parts without support using Ultimaker Cura. I copied the portion below from JonesSepp Description since it is still applicable.
Both cases have holes for the screws. They are a bit wider so M3 screws just fit through it. No support is required.
Additionally, you need to 4x M3x10 screws and 4x M3 nylon nuts. And 2 dices as well!
I printed all of this on a Creality Ender 3 V2 NEO.