Dice Tower V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an improved version of the Dice Tower made by JonesSepp.
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 200
- Makes
- 4
- Views
- 1,552
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Public Domain
This is an improved version of the dice tower made by JonesSepp. https://www.printables.com/model/74357-dice-tower
The changes I have made are reinforced arms on the cases and I made a cut away in the base of the Tower to allow the cases thicker arms to still open completely.
The tower and the two cases are both easy to print. I used PLA with a layer height of 0.2mm on a 0.4mm nozzle.
I was able to print all parts without support using Ultimaker Cura. I copied the portion below from JonesSepp Description since it is still applicable.
Both cases have holes for the screws. They are a bit wider so M3 screws just fit through it. No support is required.
Additionally, you need to 4x M3x10 screws and 4x M3 nylon nuts. And 2 dices as well!
I printed all of this on a Creality Ender 3 V2 NEO.