Rollei 35 Quick Release Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Arca-Swiss compatible quick release plate designed to fit perfectly on a Rollei 35
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 541
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Quick Release Plate is compatible with all Arca-Swiss style tripod heads. To fit the small body of the Rollei 35, I reduced its length so it doesn't stick out at the front or back of the camera. I also added a small window so you can see the frame counter.
Additional Parts Required
You only need a standard ¼ inch tripod screw. I took mine from another quick release plate I had lying around.
Assembly
You just have to screw the screw into the thread from below. If it doesn't fit, make sure the thread looks alright and try using a smaller layer height to improve the print quality .
Print Settings
- Layer Height - 0.2mm works fine, but 0.12mm looks better ;)
- Walls - 3 to make it a bit sturdier
- Material - I used Prusament PLA Galaxy Black, but any other filament should also work.