EBB36 Strain Relief Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight bracket for strain relief on the EBB36 umbilical connector
- Ocena
- 5 / 5
- Polubienia
- 95
- Pobrania
- 1066
- Wydruki
- 13
- Wyświetlenia
- 4955
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is just a small strain relief bracket I made specifically for my Voron V0.1 where I did not want to use a bulkier cable gland. The umbilical for the V0.1 is very short and lightweight, so this works well to secure it. I wouldn't use it on a printer with a larger umbilical. It effectively extends the supplied standoffs by 2.8mm. It uses M3 SHCS to secure the board to the standoffs. I didn't check the size of the zip ties used to secure the cable, but they're small…really small. I'll try to remember to get the size and post it.
EDIT: Added a picture of the cable ties used.