EBB36 Strain Relief Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightweight bracket for strain relief on the EBB36 umbilical connector
- Rating
- 5 / 5
- Likes
- 95
- Downloads
- 1,066
- Makes
- 13
- Views
- 4,955
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is just a small strain relief bracket I made specifically for my Voron V0.1 where I did not want to use a bulkier cable gland. The umbilical for the V0.1 is very short and lightweight, so this works well to secure it. I wouldn't use it on a printer with a larger umbilical. It effectively extends the supplied standoffs by 2.8mm. It uses M3 SHCS to secure the board to the standoffs. I didn't check the size of the zip ties used to secure the cable, but they're small…really small. I'll try to remember to get the size and post it.
EDIT: Added a picture of the cable ties used.