Light Up Snowflake Ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED Snowflake Ornament
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Snowflake ornament pieces were printed in Prusament PETG Signal White filament. All pieces were printed on Prusa MK3S+.
The ornament uses LEDs wired to a CR2032 coin cell battery in parallel. The LEDs are 0805 Warm White SMD LEDs that came prewired with 30 AWG wire. The battery is held by a coin cell holder with on/off switch from Adafruit. The back plate is held on by a quantity of 6 #4-40 x 3/16" machine screws which are screwed into #4-40 brass heat-set inserts installed in the snowflake base. The power button 3d model allows the on/off switch to be accessed when the backplate is on. The 30 AWG wires from each LED were lumped together and soldered to 22 AWG wires to make it easier to solder to the coin cell holder PCB. The LEDs were hot glued to the base to prevent them from moving around. Links to everything are below.
Adafruit Coin Cell holder with On-Off Switch:
https://www.adafruit.com/product/1871
0805 Warm White SMD LEDs:
https://www.amazon.com/dp/B07FN7G323?psc=1&ref=ppx_yo2ov_dt_b_product_details
Heat-Set Inserts, #4-40 x 0.135":
https://www.amazon.com/dp/B07BH5X252?psc=1&ref=ppx_yo2ov_dt_b_product_details
Screws, #4-40 x 3/16":
https://www.amazon.com/gp/product/B01HQ6UQVS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
Ribbon:
https://www.amazon.com/dp/B001685LZE?psc=1&ref=ppx_yo2ov_dt_b_product_details
Improvements that could be made
- Cut the 30 AWG wire shorter to reduce the clutter (I did not have a wire stripper that could strip 30 AWG wire, so I had to use the length provided)
- Make the ON/OFF lettering larger so it's easier to read
- Tighten up tolerances with the on/off button slot to make sliding better