1 / 5
Light Up Snowflake Ornament — image 1
1 / 5

Light Up Snowflake Ornament

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

LED Snowflake Ornament

Rating
0 / 5
Likes
6
Downloads
18
Makes
0
Views
191
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Snowflake ornament pieces were printed in Prusament PETG Signal White filament. All pieces were printed on Prusa MK3S+.

The ornament uses LEDs wired to a CR2032 coin cell battery in parallel. The LEDs are 0805 Warm White SMD LEDs that came prewired with 30 AWG wire. The battery is held by a coin cell holder with on/off switch from Adafruit. The back plate is held on by a quantity of 6 #4-40 x 3/16" machine screws which are screwed into #4-40 brass heat-set inserts installed in the snowflake base. The power button 3d model allows the on/off switch to be accessed when the backplate is on. The 30 AWG wires from each LED were lumped together and soldered to 22 AWG wires to make it easier to solder to the coin cell holder PCB. The LEDs were hot glued to the base to prevent them from moving around. Links to everything are below.

 

Adafruit Coin Cell holder with On-Off Switch:

https://www.adafruit.com/product/1871

0805 Warm White SMD LEDs:

https://www.amazon.com/dp/B07FN7G323?psc=1&ref=ppx_yo2ov_dt_b_product_details

Heat-Set Inserts, #4-40 x 0.135":

https://www.amazon.com/dp/B07BH5X252?psc=1&ref=ppx_yo2ov_dt_b_product_details

Screws, #4-40 x 3/16":

https://www.amazon.com/gp/product/B01HQ6UQVS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

Ribbon:

https://www.amazon.com/dp/B001685LZE?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

Improvements that could be made

  • Cut the 30 AWG wire shorter to reduce the clutter (I did not have a wire stripper that could strip 30 AWG wire, so I had to use the length provided)
  • Make the ON/OFF lettering larger so it's easier to read
  • Tighten up tolerances with the on/off button slot to make sliding better

Tags