Radiator bleed key / adjustment key holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for that bleed /adjustment key that we all misplace. Easy to adapt, fast print, FreeCAD source provided :-)
- Ocena
- 4,5 / 5
- Polubienia
- 35
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 523
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Holder for Radiator Bleed Key / Adjustment Key
A simple clip for that little bleed or adjustment key from the heating system that we all seem to misplace 😜
The clip provides a place for the key and simply clips onto a piece of pipe:
Customization
The STL provided here is for a attaching a 9-mm key to a 16-mm pipe (floor heating, see photo above). You can easily adapt this to other diameters by modifying the FreeCAD source file.
There are only 2 parameters you need to adjust, everything else is calculated automagically:
IDclip(the inner diameter of the "clamp")ODkey(the outer diameter of the tubular part of the key)
You could also modify the wall thickness, Thick - this is set to 2 mm.
Printing
I printed mine from some white PLA with 0.3 mm layer height and merely 5% infill.