DJI Easy Snap-On Prop Guards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enjoy the easiest prop-guards for your DJI Phantom 3. UPDATE May 2018: Added "mouse ears" to the straight arms of the…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 151
- Wydruki
- 0
- Wyświetlenia
- 1222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Enjoy the easiest prop-guards for your DJI Phantom 3.
UPDATE May 2018: Added "mouse ears" to the straight arms of the prop guards to increase adhesion to the bed. At the end of the print, these ears can be easily removed (SnapOnPropGuard_v3.stl).
UPDATE December 2016: The structure of the prop guard has been improved by reinforcing the junction points between the horizontal and vertical curved rods (SnapOnPropGuard_v2.stl).
You don't need any fixed part at the base of the motors, so it takes just 1 second to snap-on this prop guard to each arm. The grip is very strong and there is no risk of accidental detachment.
Have a look at the video: https://www.youtube.com/watch?v=S8bCWoHUm_o
Also see the video of the test: https://www.youtube.com/watch?v=YXmfAzRwDt4
Print Settings
Printer:
ZORTRAX M200
Rafts:
Yes
Supports:
Yes
Resolution:
0.14-0.19
Infill:
Maximum
Notes:
I used the Zortrax Z-HIPS filament that is strong and elastic enough to allow the perfect snap-on of the prop guard around the base of the motor.
The 3D model of this object was designed using "MOI 3D" CAD software (www.moi3d.com)
Category: R/C Vehicles