Ikea Lamp Headrest foot and phone mount adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design Goals: I had an old Ikea Tertial lamp with dents and stuff AND I wanted a way to watch youtube in my bed. It…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Design Goals:
- I had an old Ikea Tertial lamp with dents and stuff AND
- I wanted a way to watch youtube in my bed.
- It had to be very sturdy too. The extended arm is actually a lever.
Approach:
So, I designed a foot to jam between the headboard and the wall, with a block to put the lamp in.
Then, I made a custom adapter for the phone stand by Arron_mollet22 to fit where the actual lampholder was.
Bring your own:
- An Ikea Tertial Lamp
- It uses 2 M3x16mm bolts and nuts.
This is a remix from https://www.thingiverse.com/thing:398515
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50% + Modifiers blocks at 100%
Filament: Prusament PLA or PETG Grey
Notes:
I used PrusaSlicer and put a modifier in it to make the key strain portions 100% infill. Look at the screenshot in the PDF file or open the .3MF file directly in PrusaSlicer.
Lay the insert block**on the side** for maximum strength. (See screenshot)Category: Mobile Phone