Minimalist MicroSD Card Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, lightweight tool to help you with inserting & removing MicroSD cards from spring-loaded slots.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
It can be a challenge to handle the tiny MicroSD cards used in many electronics today. Many devices including 3D Printers, Drones, and Dash Cams will have a spring-loaded slot which requires you to press the small edge of the MicroSD card in to release the card. I hope this tool will help make the process easier for you!
Both versions print in under 10 minutes and use less than 1g of filament! I recommend rotating the model on edge and printing with a brim.
On the original (smallest size) model, I chose to use 3 parameters, resulting in a solid model with no infill needed.