IRP Evo X Shifter Console Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This plate is used with the IRP Evo X short shifter to cover the large opening in the console.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 1471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This product is for use with the IRP Evo X short shifter. Because this shifter does not work with the stock shift boot, this plate is used to close off the large hole in the center console when not running a shift boot. To mount this part, I recommend ordering some M6 "Well" Nutes, and M6 bolts to secure it to the stock plastic center console. You will have to drill and modify your center console to mount this plate, but you probably have already done that if you installed an IRP shifter anyways.
M6 "Well" Nuts: https://www.amazon.com/gp/product/B07YKVQKKG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I have uploaded two versions of this plate, one with a pass through for mounting a remote OBDII cable connection for those fellow "tuners", and one without.
Notes:
- Make sure to print in a heat resistant material like ABS or ASA. PLA is prone to warping in the warmth of the sun. I printed my final parts (as shown in the images) through Shapeways in PA12 nylon on a HP JetFusion machine to get a nice finished look.