Voron V0.1 fixed Tophat for 3mm Panels and longer heatinserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of original vorondesign tophat for 3mm panels and possibility to use longer (and smaller in diameter) heatinserts.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 530
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After buying some nice and sturdy 3mm thick acrylic panels from Fermio, i quickly realized, there is need for some serious changements in that tophat-construction.
Even though it is originally designed for 2mm panels, the clamping distance for the clips was as low as just 1.5mm. Additionally the available holes for these M3 heat inserts provide a dephth of just 4mm with a diameter of 4.6mm.
Well… I use some very good and stable inserts which have an outer diameter of 4.6mm and so i would have to fear, my tophat would self-destruct, when i start a print. Also my inserts are too long to mount them in just 4mm deep holes. So i made them 6mm deep with a diameter of 4.1mm.
There is enough space to use M3x10 screws for the midclips, it still should be no problem to use the original M3x8 from original BOM. For the corner clips use the original M3x12 or M3x10 if you dont have them :)
For those, who can print at least 240x240x85mm, i also added a frame in just one piece for improved stability and better optical quality. For further remixes and/or adjustments, i also provide the step-file. This should be standard, since stl-editing is just … (if i post my opinion here freely, i will get banned xD)
Anyway: This is meant for fresh builds or rebuilds. If you dont want to reprint the whole frame, just visit the Fermio-shop (i dont know, if it is allowed to post direct links here, but as always: Google is your friend…), search for these panels and on the product page you will find remixed clips for the original frame. My clips and corners will NOT fit onto an original tophat.