Salad Fork magnetic basket mod cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for the magnetic media basket available for the Salad Fork, prevents the media from being blown into the chamber.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 455
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A cover for the magnetic media basket mod available for the Honeybadger / Fabreeko Salad Fork kit, prevents the media from being blown into the chamber when the two 5015 fans are running at max speed. Imagine my surprise when my Nevermore printer carbon filter media started to get blown into the chamber. This cover sits on top of the four-part basket loosely and is then held in place by the main body of the filter assembly.
Designed for being printed with a 0.2mm layer height with a 0.4mm nozzle. Print with the top of the lid face down, no supports needed.
Recommended to use ABS or ASA but you may be able to use PETG. My chamber easily reaches 55C while printing ABS and ASA so PETG should be fine, but PLA is unsuitable for this.
This basket cover is intended for use with the magnetic basket mod that can be found here: https://github.com/Fabreeko/Salad-Fork-160/tree/main/Fabreeko_SF_CarbonFilter
For more information about the Salad Fork printer, please visit the official repo at https://github.com/PrintersForAnts/Salad_Fork