3030 hammer nuts and bolts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In time of qurantine, closed hardwareshops and the unability to move outside, some stuff gets to be unavailable.... i…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 294
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
In time of qurantine, closed hardwareshops and the unability to move outside, some stuff gets to be unavailable....
i still want to appends stuff to my printer, and at least for non mechanical vital stuff, like the controler boards case etc, plastic screws will have to do until the quarantine is lifted....
if you want the openscad code, drop me a note, since the file is part of my overall 3dmodular scalar xlp mods
On github https://github.com/nohkumado/scalar-rackmods/tree/master/masken
[Edit] added roudn edges instead of just cutting at 45deg, makes the nut turn easier
Print Settings
Printer:
Scalar XLP
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
100%
Filament:
amazon basic pla
Notes:
print the full, either by increasing the shell or setting the infill to 100%, the screws are not very thick, and the additive process is running in the wrong sense of the screws to be mechanically effective.....
that's why the high resolution and the maximised infill....
otherwise the screws come clean from the plate and can be used directly
i made the heads of the screws big enough for my hands, there's a hex insert, i suggest you still tightem them (not too much) by hand.....
and they are compatibel with usual screws and bolts
Category: 3D Printer Parts