Rainbow for plants
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print for watering your plants.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 104
- Wydruki
- 6
- Wyświetlenia
- 1043
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Print for watering your plants. This has a cavity at the top to add water with a path for the water to fall from the clouds. Lightning anchors the print in your soil.
Thunder is provided by you.
Print instructions
I printed each color individually in PLA. The Lightning is a loose fit and I used a snip of the skirt to wedge it in the cloud. The Colors all fit well with just a friction fit. The Cloud base has holes and each color has pegs. The Colors use the bottom surface as the display side. Watch out for elephants foot. Assembly may need a little glue.
Water pours out very quickly. if you want to slow it down you might add a bit of cotton ball in the top of the water path.
Printed with a single Support Enforcer on the Cloud for the water cavity.