Rainbow for plants
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print for watering your plants.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 104
- Makes
- 6
- Views
- 1,043
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Print for watering your plants. This has a cavity at the top to add water with a path for the water to fall from the clouds. Lightning anchors the print in your soil.
Thunder is provided by you.
Print instructions
I printed each color individually in PLA. The Lightning is a loose fit and I used a snip of the skirt to wedge it in the cloud. The Colors all fit well with just a friction fit. The Cloud base has holes and each color has pegs. The Colors use the bottom surface as the display side. Watch out for elephants foot. Assembly may need a little glue.
Water pours out very quickly. if you want to slow it down you might add a bit of cotton ball in the top of the water path.
Printed with a single Support Enforcer on the Cloud for the water cavity.