Counting matching models…
Description The Lockheed Martin F-35 Lightning II is an American family of single-seat, single-engine, stealth multirole combat aircraft designed for air superiority and strike missions; it also has electronic warfare and intelligence,…
As all the other battery holders did not seem to work for me I made my own. V1: has hooks to hold on to the frame. V2: slides ove the frame so won't pull off in a crash.
This mod to the Lightning Blaster Pro allows you to quickly swap suppressors and/or flash hiders. This mod involves no cutting of the blaster shell and can be accomplished in about thirty minute. If you would like to build the MFG (muzzle…
This model is based on the F-35 Lightning II. It prints in two pieces but on the same plate, the jet itself is about 135mm long and with the base its total height is about 75mm.
A minimalistic 3D-printed charging dock designed for Apple AirPods with a Lightning connector . Features Compatible with the official Apple Lightning cable Clean, minimal design Clever cable integration to secure the connector in place…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Be Lightning fast with this hair-trigger for your Dart Zone Aeon, Nexus, and…
Modern Style Coaster Set Lightning Pattern 100mm With Holder
This is a 3D printable “95” racing-style desk prop designed for tool-less, glue-free assembly . Each number has a built-in notch that slides securely into a matching cavity on the baseplate, creating a stable press-fit connection without…
Command the skies with this imposing Storm Giant Thunder Warlord , a celestial titan sculpted with raw elemental authority. Clad in heavy armour and gripping a lightning-forged spear, this giant stands atop rolling storm clouds, ready to…
Capture raw atmospheric power with this Storm Cloud with Lightning Strike , a dynamic weather-effect model designed to bring energy and drama to your displays. A dense, swirling cloud mass hovers above a jagged lightning bolt that crashes…
A 3D printed F1 inspired steering wheel (just the steering wheel) with a 2.8" screen, Direct Force Feedback, buttons and even a paddle shifter! Most of the parts are to be 3D printed but some parts like the motor are to be bought since…
The Rookie Phenom, Cast in Speed. This is not a car. This is the living embodiment of ambition, heart, and second chances, cast in vibrant crimson. Lightning McQueen immortalizes the relentless, never-say-die spirit of a champion forged…
I really loved the presence tokens by BlueChromis , but after working on another project and seeing two color prints, I thought that two color tokens would look nice. This is a remix of BlueChromis's Lightning token, raised instead of cut…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License Flowalistik…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License Flowalistik…
Update: 2026-08-02 Added a slightly wider one that preserve FPS better and has a similar accuracy boost. Description: The original barrel is just too short (25mm), resulting in poor accuracy. It has a little bit tigher bore and much…
These muzzles are modified for compatibility with this kit: https://www.printables.com/model/1691579-ait-lighting-stock-attachment-point-picatinny-moun They are press fit and should be easily pulled in and out of the blaster but should…
This is a simplified 3D model of a DFRobot Gravity lightning sensor. I created/used it as a reference model while designing the enclosure for a volcanic drone payload project. The model is mainly intended for mechanical fitting, layout…
The carrier-based variant of the F-35 fighter jet (imho those larger wings give it much better looks than the A and B models). Like my other kits, modeled at a scale of 1:150 (10,5 cm)
F-35 Lightning II is the United States' newest fighter, developed and produced by Lockheed Martin. The F-35 is a 5th Gen multirole stealth fighter, resulting from the Joint Strike Fighter program. The JSF program aimed at providing an…
I think the orientation for printing should be obvious. I used the X1-C with AMS, and three colors of PTEG. Once the two parts are made (about 10 hours), measured and glued with J-B Kwik. I then re-enforce with JB Weld. It's been in the…
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE LIGHTNING CABLE REPAIR Print two identical shells to fix your lightning connector. Before assembling the parts, apply some glue to fill the inside of both pieces. Next, place your…
The English Electric Lightning is a British fighter aircraft that served as an interceptor during the 1960s, the 1970s and into the late 1980s. It was capable of a top speed of above Mach 2. The Lightning was designed, developed, and…
(deutsch unten) Charging dock for the Magic Mouse from Apple. Therefore the mouse is always full charged before using. There are variants for different cables. 1. Variant: Flat cable 8mm high(ASIN B0CY27YBFS) 2. Variant: Round cable 13mm…
This is designed to fit an apple lightning cable snugly, preventing it from getting lost in the sea of cables we all know you have under your desk. Mounted with glue, these make a great addition for you bedside, workstation, or car.
Bendy helps stabilizing frayed and kinked ends of Apple Lightning cables and was designed to print without support using flexible materials like NinjaTek's Cheetah or NinjaFlex. Bendy-A: Use the files for Bendy-A when using a classic…
The lightning bolt consists of 3 parts. One handle and two lightning parts. Simply put them together and you're done.
Description The Lockheed Martin F-35 Lightning II is an American family of single-seat, single-engine, stealth multirole combat aircraft designed for air superiority and strike missions; it also has electronic warfare and intelligence,…
As all the other battery holders did not seem to work for me I made my own. V1: has hooks to hold on to the frame. V2: slides ove the frame so won't pull off in a crash.
I recommend that you use the following settings: Nozzle 0.4mm Layer height 0.2mm No Supports Vase mode 0 Top and Bottom Layers Infill 0% Approximate printing time: 00:11 Approximate material used: 2g I would appreciate your feedback to…
Just a small lightning earrings since I didn't find something which please me. Printed with some yellow PLA Silk
Das ist ein kleiner Stöpsel für das iPhone mit Lightning Anschluss. Bei mir das iPhone 12pro. zum einen wird der Anschluss geschützt, zum anderen passt der perfekt in Verbindung mit der originalen Apple Lederhülle. kein Überstehen. Das…
A remix of the USB-C connector based version from @ChrisBoorman_136327.
***When they finally release this technology, remember you saw it here first!*** Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my…
The landing gear fits into 3 slots on the bottom. The propellers don't move. The model might fall over if you use the landing gear because I have not tested this model, so if it does please comment.
Magnetic box for the Maybesta lightning microphones. Since these microphones don't come with a box and having them in the original packaging is uncomfortable. Decided to make one. Print in place! Link to microphone: https://a.co/d/jag9trB
A client asked me to create them a 58mm x 58mm Circle Stamp with a Lightning Bolt. Suggested Printing Options: - 0.2mm Layer Height - 5-10% Infill - Ironing (This fills gaps in to help prevent clay from getting stuck) I have other stamps…
I wanted to make giant numbers using the lighting string cable. There were however no clips to fasten the light sockets to a board. These clips fit perfectly on the lamps, and secure the lamp on the board. Two clips are needed for each…
Update 01.06.2024: The wall generation in the current slicer version makes the eyebrows rough. I have adjusted the color so that it is not noticeable (new version V3). Summary This is a model of Lightning McQueen in a kit card style. Some…
Buell Lightning headlight assembly without the reflector. I may add this at a later date. The model is dimensionally accurate for every feature I was able to measure. This headlight assembly design was used for 883cc (xb9) and 1203cc…
Made some desk organizers inspired by Harry Potters lightning scar. I made different versions with different sizes and heights. Also you can choose between an open organizer or one that is separated in different sections. Walls are 1,2mm…
This is another usb-c/lightning port cleaner improved and hardened variant that can be used as key chain and also has a flat surface large enough for large hands but also has enough space for own advertisement stickers. Could also be used…
Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…
Schlüsselanhänger mit Blitz. Gedruckt mit Bambu Lab X1C aus PLA. Keychain with lightning bolt Print with Bambu Lab X1C made of PLA.
Blitz mit Stand Fuß. Perfekt als Deko im Büro auf dem Schreibtisch oder der Werkbank in der Werkstatt. Beide Teile sind passgenau. Für den perfekten halt müssen die beiden Teile verklebt werden. Um den stehenden Blitz zu drucken müssen…
Small fidget lightning bolt. I wouldn't recommend scaling it down. The tolerances are decently tight but as loose as I could make them for such a small piece. Prints perfectly on Bambu X1C.
Sculpture of a Lightning Rod with a Catcher Point or Franklin Point
A fun charger to charge your phone with. Use supports on some of the prints.
A compact and durable case designed to reinforce Apple’s Lightning to 3.5mm audio adapter, known for its fragile cable. The case reduces stress on the connector, providing extra support to prevent wear and tear. It includes enough…
This project uses the CJMCU AS3935 sensor to detect the electromagnetic field of lightning by calculating its strength and distance. Once it captures the lightning, it uploads it to my own meteorology API and also displays the information…
bom: for each sensor block: 1x 5mm steel ball 1x microswitch without the lever 2x ecas4 couplers without the rubber sealing 1x ws2812 smd led 10mm button 2x 2mm 12mm long screws to hold the microswitch use abs or asa with standard voron…
This organizer can sort an adapter and is magnetic.
(Re-uploaded and revised, May 2021) An ogreish tri-barrelled lighting gun tank for SciFi FightTech fights at 6mm. This is a remix of the Schrek PPC Carrier for Generic SciFi War Robot Fights by LeoCeballos. While I really like the design…
Exemple model has been used with PLA Size 3,2 cm x 18 cm Tips: To create a longer diffuser, you can chain and align multiple pairs by overlapping the sections. For optimal light diffusion, use translucent white instead of cold white.
Lockheed Martin F35-Lightning II Cookie Cutter
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page. Pictures shown are printed in an 0.4mm Nozzle Print at 100% infill with a…
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page. Pictures shown are printed in an 0.4mm Nozzle Print at 100% infill with a…
Lightning bolt shaped earrings. 21 x 38 x 2mm (scale in slicer software if needed).
Simple case with no fasteners, I remixed "The Ultimate Box Maker" using fusion360 to not need screws to hold the case together. (Still need at least 2 to hold the board in place)…
Lightning cable holder. No supports needed. Use double tape to fix it.
This is a small tool that will help you clean the dust and debris from the USBC, USB Type C, Lightning port of your smart phone or air pods. It's less than 6 minutes print less that 1 gram of filament.
Used with the Flywoo GM10 Nano v3 GPS. IMPORTANT: To get a more stable GPS lock I recommend my new design to mount the GPS: Updated version and seperate VTX antenna mount. Support my work: All of my models are available for free. If you'd…
In my previous design the GPS was mounted on the back, but to get a more reliable GPS Lock I moved the mounting position of the GPS to the top of the quad. Support my work: All of my models are available for free. If you'd like to show…
Antenna diameter: 3,5mm Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU
The camera has a friction fit in the frame. No screws needed. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU
Tampa Bay Lightning NHL team golf ball marker (25mm diameter by 2mm height). Usage Place on the green to mark your golf balls location when it is in the travel path of a golf ball further away from the golf hole. Printing Tips For SLA…
A dual fan lightning grill I designed to fit my theme for my Montech XR PC case.
I recently purchased a 2024 F-150 Lightning Flash and I found the wireless charging to be unreliable unless your phone is completely flat. So I decided to design something better to cover it. There are three models. One is for an iPhone…
A lamp shade for the Dennerle Nano Power-LED 5.0 to stop it from blinding when sitting on a lower level (e.g. chair, couch etc). When printing in translucent/transparent filament I recommend using an inlay of a dense filament. E.g. Box…
This mod to the Lightning Blaster Pro allows you to quickly swap suppressors and/or flash hiders. This mod involves no cutting of the blaster shell and can be accomplished in about thirty minute. If you would like to build the MFG (muzzle…
I found it worked better when it was thinner, so I havled its height
Lint Lifter! A handy tool to clean the charging port on your phone, laptop, or other electronic device. This is a useful tool that prints in about 8 minutes! Inspiration I printed the tool from fifindr on printables, and I thought it…
a modular airpods dock to charge it without having cables around the desk. actually is designed for the original lightning apple cable but you can modify the internal passage to fit yuor own cable from the f3d file i used two m4 x 20mm…
Printer : Bambulab X1C Filament : Overture Pla General settings Wall loops: 2 Infill: 8% Sparse infile pattern: Gyroid (I just like gyroid infill) Support: Tree Normal supports should work as well. Make sure that no supports are generated…
Tis is a piece to protect your Amazon basics lightning cable from breaking
Very well designed cleaning tool to clean USB, lightning or C charger. I was very surprised how the cleaning tool works and how much dust I got out of my phone or airpods.
About the F-35 Lightning II The Lockheed Martin F-35 Lightning II is an American family of single-seat, single-engine, supersonic stealth strike fighters. A multirole combat aircraft designed for both air superiority and strike missions,…
Tampa Bay Lightning themed magnet What you need 2 magnets - holes are 14.5 mm in diameter (more details in drawing in 2nd picture) Superglue to secure magnets Print Settings: Supports: No Resolution: 0.2 mm Infill: 10%+ Notes: Use an…
Wanted a 3D printed phone mount that would fit in the unused coin slot in the dash on my 2014 F150 Lightning. Something that would lock into place easily so it wouldn't pop out, and would be compatible with the standard AMPS hole pattern.…
A lightning-octopus monster that I made, drew, and then 3D modeled myself. It is modeled in a single color, but is is possible to print in multi color if you remix or change it in your slicer. This is my first model I have ever made and…
Easily and cheaply route cables with these cable routers. Each uses just 1 gram of filament and prints in 9 minutes! Extra Components required: Magnets (make sure you buy 10 x 5 x 2mm)…
I am always amazed by the incredible free software you can use nowadays. This cookie cutter was designed for my daughter with Inkscape and OpenSCAD following this tutorial:…
A great Wall Art of rock lightnings. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
If someone does not want a container with a label, a container without a label is also available. The cleaners can be sharpened with a file if someone wants a sharper edge.
Tampa Bay Lightning Oversized Necklace Logo that I designed. I hope you enjoy!
