1 / 3
F-150 Glove Box Trash Bag Hook — Trash, Grocery & Gear | 2021-2025 Ford F-150 & F-150 Lightning — image 1
1 / 3

F-150 Glove Box Trash Bag Hook — Trash, Grocery & Gear | 2021-2025 Ford F-150 & F-150 Lightning

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Glove box trash bag hook for the 2021-2025 Ford F-150 and F-150 Lightning. No adhesive, no drilling, no modification.

Rating
5 / 5
Likes
89
Downloads
491
Makes
1
Views
2,376
Reviews
1

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Public Domain

A hook that slips onto the glove box of a 2021-2025 Ford F-150 and gives you somewhere to hang a trash bag, a grocery bag, or a wet pair of gloves. No adhesive, no drilling, no modification to the vehicle. Open the glove box, slip it on, done.

I designed this for my own 2023 F-150 as a convenient place to hang a trash bag and keep my truck from getting trashed up.

Fitment

Vehicle

Years

Status

Ford F-150

2021-2025

Confirmed

Ford F-150 Lightning

2022-2025

Shares the same glove box part number

Ford F-150

2015-2020

Use Ryan Cravens' remix instead

Ford Super Duty (F-250/350/450/550)

2023+

Unconfirmed — see below

Ford Expedition

—

Unconfirmed — see below

The 2021+ F-150 and F-150 Lightning use the same lower glove box assembly (Ford part number family ML3Z-1506024), so if it fits one it fits the other.

Super Duty and Expedition owners: I don't own either, so I can't confirm these. The 2023+ Super Duty glove box is a different part number (PC3Z-6006024), so assume it does not fit until someone proves otherwise — though the cabs are close enough that it's worth a test print. The Expedition shows up in some fitment listings against the same F-150 part, which is more promising.

The 10-second check: this hook fits an edge 20 mm (0.79 in) thick and reaches 30 mm (1.18 in) over it. Put a caliper on your glove box door. If your numbers match, it'll fit — whatever badge is on the tailgate. Since there's nothing to glue and nothing to drill, a failed test print costs you twenty minutes and no damage to the truck.

If you get it working in something that isn't an F-150, leave a comment and tell me what it was. I'll add it to this table and credit you.

Print settings

Material

PETG, CF-PETG or PCTG. High-temp PLA+ might work. ABS/ASA if you enjoy printing them; nylon/PA will easily shrug off the heat

Layer height

Whatever you like — it doesn't matter here

Perimeters

3

Infill

15% or more

Supports

None

Orientation

As loaded — hook flat on the build plate

Choose your material wisely. Standard PLA is not going to survive a warm spring day with any kind of load on it. High temperature PLA+ might work. PETG, PCTG, ABS, ASA will handle it easily. Nylon wouldn't even notice if you parked and left your car facing into the desert sun.

Load

No formal rating, but the real-world number: I've had seven pounds (3.2 kg) of trash hanging on it for weeks through a hot New Mexico summer with no sign of deformation. That one was printed in CF-PETG (carbon fiber filled).

Driving a 2015-2020 F-150? Ryan Cravens has you covered

Ryan Cravens took this design and reworked it for the 2015-2020 F-150 — different dash, same idea, and a proper fit rather than a hopeful one. If you're in a 13th-gen truck, grab his version instead. It's a brilliant design.

Other Ford models I've made

Tags