F-150 Glove Box Trash Bag Hook — Trash, Grocery & Gear | 2021-2025 Ford F-150 & F-150 Lightning
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glove box trash bag hook for the 2021-2025 Ford F-150 and F-150 Lightning. No adhesive, no drilling, no modification.
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 490
- Wydruki
- 1
- Wyświetlenia
- 2366
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
A hook that slips onto the glove box of a 2021-2025 Ford F-150 and gives you somewhere to hang a trash bag, a grocery bag, or a wet pair of gloves. No adhesive, no drilling, no modification to the vehicle. Open the glove box, slip it on, done.
I designed this for my own 2023 F-150 as a convenient place to hang a trash bag and keep my truck from getting trashed up.
Fitment
Vehicle | Years | Status |
|---|---|---|
Ford F-150 | 2021-2025 | Confirmed |
Ford F-150 Lightning | 2022-2025 | Shares the same glove box part number |
Ford F-150 | 2015-2020 | Use Ryan Cravens' remix instead |
Ford Super Duty (F-250/350/450/550) | 2023+ | Unconfirmed — see below |
Ford Expedition | — | Unconfirmed — see below |
The 2021+ F-150 and F-150 Lightning use the same lower glove box assembly (Ford part number family ML3Z-1506024), so if it fits one it fits the other.
Super Duty and Expedition owners: I don't own either, so I can't confirm these. The 2023+ Super Duty glove box is a different part number (PC3Z-6006024), so assume it does not fit until someone proves otherwise — though the cabs are close enough that it's worth a test print. The Expedition shows up in some fitment listings against the same F-150 part, which is more promising.
The 10-second check: this hook fits an edge 20 mm (0.79 in) thick and reaches 30 mm (1.18 in) over it. Put a caliper on your glove box door. If your numbers match, it'll fit — whatever badge is on the tailgate. Since there's nothing to glue and nothing to drill, a failed test print costs you twenty minutes and no damage to the truck.
If you get it working in something that isn't an F-150, leave a comment and tell me what it was. I'll add it to this table and credit you.
Print settings
Material | PETG, CF-PETG or PCTG. High-temp PLA+ might work. ABS/ASA if you enjoy printing them; nylon/PA will easily shrug off the heat |
Layer height | Whatever you like — it doesn't matter here |
Perimeters | 3 |
Infill | 15% or more |
Supports | None |
Orientation | As loaded — hook flat on the build plate |
Choose your material wisely. Standard PLA is not going to survive a warm spring day with any kind of load on it. High temperature PLA+ might work. PETG, PCTG, ABS, ASA will handle it easily. Nylon wouldn't even notice if you parked and left your car facing into the desert sun.
Load
No formal rating, but the real-world number: I've had seven pounds (3.2 kg) of trash hanging on it for weeks through a hot New Mexico summer with no sign of deformation. That one was printed in CF-PETG (carbon fiber filled).
Driving a 2015-2020 F-150? Ryan Cravens has you covered
Ryan Cravens took this design and reworked it for the 2015-2020 F-150 — different dash, same idea, and a proper fit rather than a hopeful one. If you're in a 13th-gen truck, grab his version instead. It's a brilliant design.